SerialNine

These are specially modified X7 stub axles. Billet plug welded and CNC precision machined for straightness and zero runout.

CNC drilled to 5x114.3 and fitted with ARP extended wheel studs enabling you to use any slip on spacer to fine tune the very critical X7 wheel offset.

Available with BRAND NEW 5 bolt redrilled X7 Brake Rotors.(stock toyota studs are available upon request).

Hubs include ARP studs. For NEW rotors add $100. Toyota studs instead of ARP studs remove $30.

Made from 6061 T6 billet CNC machined Aluminum, anodized SERIALNINE black.

Recommended for Drifting and Racing

Gets rid of the slop in the rear-end, dramatically improves direct steering inputs and predictability Alignment stays true under all conditions.

Very tight tolerances, to both the body stud and subframe holes.

Slightly louder than stock

All support braces , plates and e-brake cables fit as stock.

-Easy installation, approx 30min-1 hour depending on your car and your skills

(They are NOT press in, but have a zero tolerance fit for absolutely NO movement once installed. If your car is tweaked or bent in any way you will have to enlarge the holes on the bushings to fit your car.)