SerialNine

SERIALNINE DIY Weld-on strut tubes allow the DIY builder to adapt modern day fully threaded coilovers to welded-strut style spindles. Any car with 2" OD stock struts can use these to give you a wider selection of available coilover options. They are available threaded or blank.

SERIALNINE replacement swaybar endlinks are OEM quality replacements to relocate the swaybar mount to the lower control arm. These transmit movements more precisely to the swaybar than the stock strut mount. Steering inputs are crisp and uninterrupted, and feel is increased. These come complete with urethane bushings.  

We have developed the First and BEST FULL coilover kit for X7 chassis.  Our kit is THE LOWEST and most comprehensive setup for Aggressive street/Drifting/Track. Comes with 15 way adjustable STANCE GR+ SS-D dampers, HD weld on strut tubes, 12/9 k springs, SERIALNINE engraved adjustable front camber plates, weld in rear upper spring perches, Front swaybar endlinks, and all hardware and bushings required. Street and track tested, engineered for MAXIMUM lowness, able to Drive and Drift Tucking 18" rims with full travel, yet can go up to 1" lower than stock if required.

*** This kit Requires WELDING TO YOUR EXISTING SPINDLE.***   

*Requires Drilling and Welding for installation. 

-MUST specify whether running X7 or X8 front swaybar. 

We have taken our famous FULL coilover kit for X7 chassis and geared it towards street cruising bellyscrapers. Our kit is THE LOWEST and most comfortable street setup for X7 PERIOD.  Comes with 15 way adjustable STANCE GR+ dampers, HD weld on strut tubes, 10/7 k springs, SERIALNINE engraved adjustable front camber plates, weld in rear upper spring perches, Front swaybar endlinks, and all hardware and bushings required. Street and track tested, engineered for MAXIMUM lowness, and a silky smooth ride.  This kit enables you to Drive comfortably TUCKING RIM with the chassis 2" off the ground, yet can go up to 1" lower than stock if required.

*** This kit Requires WELDING TO YOUR EXISTING SPINDLE.*** 

* Requires Drilling and Welding for installation. 

-MUST specify whether running X7 or X8 front swaybar.