SerialNine

Made from 6061 T6 billet CNC machined Aluminum, anodized SERIALNINE black.

Recommended for Drifting and Racing

Louder than stock, especially if you are running solid subframe bushings

Provides 100% power transmission, throttle modulation is more precise, on/off transitions are directly linked to wheel speed.

Will help alleviate the cracking subframe issue, due to the diff not being able to move whatsoever and hammer the subframe.

Made from 6061 T6 billet CNC machined Aluminum, anodized SERIALNINE black.

Recommended for Drifting and Racing

Raises the subframe up 10mm for improved geometry and travel Helps get rid of excessive camber and toe, alleviates axles hitting the subframe under full compression.

Gets rid of the slop in the rear-end, dramatically improves direct steering inputs and predictability Alignment stays true under all conditions.

Very tight tolerances, to both the body stud and subframe holes.

-All support braces , plates and e-brake cables fit as stock.

-Easy installation, approx 30min-1 hour depending on your car and your skills. (They are NOT press in, but have a zero tolerance fit for absolutely NO movement once installed. If your car is tweaked or bent in any way you will have to enlarge the holes on the bushings to fit your car.)