$610

SPORT Front Upper Control Arm adjustable from +5mm ~ -15mm SPORT arm is for minor positive and medium camber adjustment. Balljoint corrected for -2" lower than stock ride height.

$610

ONI Front Upper Control Arm adjustable from -20mm ~ -40mm  Onikyan arm is for extreme camber and low cars. Balljoint corrected for -3.5" ride height (has limited Down Travel)

$610

​Replace your old worn out ball joints with this OEM replacement arm. Non adjustable Add camber to the front of your IS300 with these shorter front upper control arms 

$330

Highly adjustable toe arm (In-Situ) +/- 20mm from stock. Pillow mounting for zero deflection and precise alignment.

$310

Highly adjustable traction arm (In-Situ) +/- 20mm from stock. Pillow mounting for zero deflection and precise alignment.

$350

Highly adjustable lower control arm (In-Situ) +30 ~ - 20mm from stock. Pillow mounting for zero deflection and precise alignment. Two ride height positions ( stock or -35mm) to accommodate longer dampers or allowing higher airbag pressure for lower rider height. has same effect as 35mm RCA.

$350

Solid subframe bushings replace the compliant OEM rubber bushings. Made of 6061-T6 aluminum and finished in our signature green. We recommend these to anyone in search of more direct and precise handling. Easy to install and100% streetable with only slightly increased NVH over stock (unnoticeable with full interior)

*Raises Subframe 10mm over stock 

$300

Solid differential bushings replace the compliant OEM rubber bushings. Made of a hybrid delrin/aluminum for improved NVH over all aluminum bushings. Finished in our signature white and green combo, we recommend these for anyone looking to improve power transfer through the drivetrain. These are easy to install and100% streetable. *raises diff 6mm over stock 

$200

35mm Roll Center correction correcting roll center and bumpsteer. (lowers your current ride height 35mm as well) 

Precision machined from 6061 Aluminum and finished in anodized SERIALNINE green with laser etched crest logo ​

- Durable Nickel plated Stainless Steel Dowel 

- Perfect for Short Knuckles 

- Comes with new 12.9 hardware 

$2495

​The highest quality, most technically advanced adaptor system to mate the Toyota JZ Engine to a Nissan CD009/JK Transmission the market.

$200

Our X-Member PRO is a beautifully efficient solution to fabricating your own transmission cross member. Made of billet 6061-T6 aluminum and machined out for lightness, strength and function. These fit perfectly with our CD-PRO kits and certain other brands of adapters.