top of page
JZX110-100.jpg

adjustable control arms

SPORT RUCA

$750

SPORT Rear Upper Control Arm adjustable from +5mm ~ -35mm SPORT arm is for minor positive and medium camber adjustment. Balljoint corrected for -2" lower than stock ride height. Pillow mounting for zero deflection and precise alignment.

ONI RUCA

$750

ONI Rear Upper Control Arm adjustable from 0mm ~ -50mm shorter than stock. Onikyan arm is for extreme camber and low cars. Balljoint corrected for -3" ride height (has limited Down Travel) Pillow mounting for zero deflection and precise alignment.

TOE ARM

$330

CNC machined form 7075 Aluminum for strength and light weight. Highly adjustable toe arms (In-Situ) +/- 20mm from stock. High quality 3 piece chromoly rod end for zero deflection and precise alignment.

TRACTION ARM

$310

Highly adjustable traction arm (In-Situ) +/- 20mm from stock. Pillow mounting for zero deflection and precise alignment.

LOWER CONTROL ARM

$550

New 6061-T6 Billet aluminum LCA's. Highly adjustable lower control arm (In-Situ) +30 ~ - 20mm from stock. Pillow mounting for zero deflection and precise alignment. Two ride height positions ( stock or -35mm) to accommodate longer dampers or allowing higher airbag pressure for lower rider height. has same effect as 35mm RCA.

Please reload

solid bushings system

$350

Solid subframe bushings replace the compliant OEM rubber bushings. Made of 6061-T6 aluminum and finished in our signature green. We recommend these to anyone in search of more direct and precise handling. 100% streetable with only slightly increased NVH over stock (unnoticeable with full interior)

$300

Solid differential bushings replace the compliant OEM rubber bushings. Made of a hybrid delrin/aluminum for improved NVH over all aluminum bushings. Finished in our signature white and green combo, we recommend these for anyone looking to improve power transfer through the drivetrain. These are 100% streetable. 

 

Please reload

camber/alignment setting equipment

$200

35mm Roll Center correction correcting roll center and bumpsteer. (lowers your current ride height 35mm as well) 

Precision machined from 6061 Aluminum and finished in anodized SERIALNINE green with laser etched crest logo ​

- Durable Nickel plated Stainless Steel Dowel 

- Perfect for Short Knuckles 

- Comes with new 12.9 hardware 

Please reload

drivetrain and accessories

$2495

The highest quality, most technically advanced adaptor system to mate the Toyota JZ Engine to a Nissan CD009/JK Transmission the market.