adjustable control arms
$330
Highly adjustable toe arm (In-Situ) +/- 20mm from stock. Pillow mounting for zero deflection and precise alignment.
$310
Highly adjustable traction arm (In-Situ) +/- 20mm from stock. Pillow mounting for zero deflection and precise alignment.
$350
Highly adjustable lower control arm (In-Situ) +30 ~ - 20mm from stock. Pillow mounting for zero deflection and precise alignment. Two ride height positions ( stock or -35mm) to accommodate longer dampers or allowing higher airbag pressure for lower rider height. has same effect as 35mm RCA.
solid bushings system
$200
35mm Roll Center correction correcting roll center and bumpsteer. (lowers your current ride height 35mm as well)
Precision machined from 6061 Aluminum and finished in anodized SERIALNINE green with laser etched crest logo ​
- Durable Nickel plated Stainless Steel Dowel
- Perfect for Short Knuckles
- Comes with new 12.9 hardware
$300
Add more clearance from the knuckle to your airbags or struts by allowing the strut assembly to move inwards. Direct fit to Airlift struts. *Does NOT add camber
drivetrain and accessories
$2495
The highest quality, most technically advanced adaptor system to mate the Toyota JZ Engine to a Nissan CD009/JK Transmission the market.
$610
SPORT Front Upper Control Arm adjustable from +5mm ~ -15mm SPORT arm is for minor positive and medium camber adjustment. Balljoint corrected for -2" lower than stock ride height.
$610
ONI Front Upper Control Arm adjustable from -20mm ~ -40mm Onikyan arm is for extreme camber and low cars. Balljoint corrected for -3.5" ride height (has limited Down Travel)
FRONT ARMS
REAR ARMS
$350
Solid subframe bushings replace the compliant OEM rubber bushings. Made of 6061-T6 aluminum and finished in our signature green. We recommend these to anyone in search of more direct and precise handling. Easy to install and100% streetable with only slightly increased NVH over stock (unnoticeable with full interior)
*Raises Subframe 10mm over stock
$300
Solid differential bushings replace the compliant OEM rubber bushings. Made of a hybrid delrin/aluminum for improved NVH over all aluminum bushings. Finished in our signature white and green combo, we recommend these for anyone looking to improve power transfer through the drivetrain. These are easy to install and100% streetable. *raises diff 6mm over stock
