top of page
REIN-8.png

REIN Hydro E-Brake

SERIALNINE's answer to the hydraulic E-Brake handle.

Our professional billet handle is engineered to the highest level and packed with features to compliment your drift car. 

IMG_1130.JPG

The criteria was for the handle was simple; develop an ultra compact and lightweight handle with an innovative, professional design. It needed to be effortlessly adjustable, easily mounted, and have an enjoyable and repeatable feel with every pull. It also had to be reliable, field serviceable anywhere in the world and have that signature SERIALNINE style.

IMG_2146_edited.jpg

Vertical and horizontal versions available.

Both versions offer a lightweight 1"od tubular handle bonded to a precisely machined pivot with smooth linear action and zero slop. The stopper has been engineered to provide a positive feel upon release.

 

The vertical version is 420mm (16.5") long with a stylish removable top cap. Handle angle can easily be adjusted forward or back 12 degrees from vertical to suit your driving position.

IMG_1134.JPG
IMG_1123.JPG

The hoirzontal version is 370 (14.5") long with a stylish removable top cap. Handle angle can quickly be adjusted  24 degrees from horizontal to suit your needs.

Innovative clevis design allows large range of angle and a linear stroke. Pushrod is broached to a 4mm hex for ease of adjustment.

IMG_1139.JPG
IMG_1174.JPG

Open base design allow easy access to adjustment and mounting bolts. All hardware is grade10.9 and METRIC. No searching for odd wrenches to service your hydro. 

"Line of sight" mounting offers easy access of included 10.9 mounting bolts. Front mounts are slotted to allow quicker service from hard to reach areas like under the dash or console. -3 male nipple is included. 

IMG_1158.JPG
IMG_1152.JPG
IMG_1176.JPG
IMG_1171.JPG

Three stylish colors available: Purple, Gunmetal and Red. Top cap is removable and valuable items can be stored in handle.

IMG_1131.JPG
IMG_1146.JPG

Two types of pre-cut weld on mounting solutions:

-11GA steel with tabs that can be bent and/or cut to suit any shape of tunnel.

-1/4" thick steel and can be used to mount the hydro on the side of the tunnel.

You can also download the mounting template if you want to make your own solution.

Universal fit for any car

bottom of page